Airgun Moderator 6″
The best just got better!
- Our sixth generation of TalonTunes sound moderator SOS.
- All anodized finish. No scratching or chipping.
- 360 degrees of venting.
- Custom made high efficiency internals.
- Double o rings on connector.
- Designed to replace your factory end cap use your set screws to tighten the shroud down
- Will work with or without sound lock system.
- Will reduce sound signature by 60-70%.
- Will work with .177, .20, .22, and .25 caliber.
- Revolutionary Design.
- Weight is 5.3 Ounces.
Airgun Moderator will drastically reduce the muzzle blast of your ----
- Talon with a 12" barrel,
- Talon SS with 12" or 18" barrel,
- Condor with 12" or 18" barrel,
- Condor SS with 12", 18", or 24" barrel,
- Escape SS with 12" or 18" barrel.
- Will work with all calibers.
This six inch shroud is a direct replacement for your AF end cap and will work with the sound lock system. These sell out very quickly - order now!
11 reviews for Gen.6 SOS …. 6″ Airgun Moderator
running a condor ss with a 24″ barrel in .22cal, .166 top hat and powerwheel 7.7. pushing 25grs@1000fps so not full boar but still potent.
it’s rather neighbor offensive unmoderated. with the 6″ moderator it’s noticeable but not louder than the pellet smacking a squirrel and about par with stock condor ss at my current settings. backyard shooting doesn’t seem to bother anyone.
turning the power down to 800fps range yields much stealthier results.(brass hammer and O-ring mod, highly recommend)
fit is snug but excessive removal and installation wore the o-rings gave it a bit of play, remember to lube your o-rings.
hundreds of pellets have passed thru it and no sign of internals coming loose.
the 9″ work better if you don’t have a length limit. condor ss with a 9″ is about 47″
Only logged in customers who have purchased this product may leave a review.